Coil Handling Equipment - Coil Feeding, Servo Feeds, Coil Handling

HOME ABOUT US CONTACT US


Coil Cradles Cradle/Straightener Combinations 4,000 - 40,000 lb.				Standard Equipment Cradle/Straightener Combinations 60” diameter coil capacity (optional 72”) Hardened nest rolls Hardened pinch rolls (both rolls powered) Flame hardened pinch roll cluster gears 230, 460 or 575 volt electric, 3 phase (110V at controls optional) Payout rate fixed at 60 FPM controlled by loop control arm Motor and gear reducer driven Electrical disconnect enclosure standard Heavy steel plate welded construction Electrical circuit contains: manual jog forward and reverse, also automatic cycle in forward controlled by loop control arm Adjustable side plates hold the coil firmly in position for continuous payout
		This unit uses standard cradle construction with a powered straightener. All of our powered straighteners have a hardened gear train, and all feature cluster gears on both the entrance and ext pinch rolls. All bottom straightening rolls are powered. Unit shown is 12,000 lb. cradle with 3.5" diameter, five-roll powered straightener.
Coil Cradles - 4,000 Lb.				Coil Cradles - 4,000 Lb. 60” diameter coil capacity (optional 72”) Hardened 3 ½” diameter nest rolls Hardened 3” diameter pinch rolls (both rolls powered) Flame hardened pinch roll cluster gears 230, 460 or 575 volt electric, 3 phase (100V at controls optional) Payout rate fixed at 60 FPM controlled by loop control arm and adjustable timer Motor and gear reducer driven Electrical disconnect enclosure standard Heavy steel plate welded construction Adjustment of pressure on the two hardened driving pinch rolls is by a chain and sprocket arrangement (air pinch is optional) Electrical circuit contains: manual jog forward and reverse, also automatic cycle in forward controlled by loop control arm Drive unit 2 HP 3-phase standard (other drives available) Adjustable side plates hold the coil firmly in position for continuous payout .250” thick material max. capacity at full width Manually adjustable stock peeler
		Optional Features 60” diameter return stock deflector 110 volt electrics at controls Air cylinder pinch roll, hand valve actuated, in lieu of chain and sprocket 72” diameter coil capacity Crodon surfaced pinch rolls Overhead tip-up chute
Coil Cradles - 6,000-20,000 Lb.				Coil Cradles - 6,000-20,000 Lb. 60” diameter coil capacity (optional 72”), widths 12-48" 3/4” thick independently adjustable side plates Hardened and ground 3 ½” diameter pinch rolls on models 12” - 30” wide (4 ½” on models 36” - 48” wide) Fused electrical disconnect enclosure 230, 460 or 575 volt electric, 3 phase (110 volt at controls) Heavy duty flame hardened cluster gears on pinch rolls Manually adjusted stock peelers (other peelers optional)
		Optional Features Large return stock deflectors Air-operated tip-up chutes on models up to 36” wide Roll-down chutes in models 42” wide & wider Crodon surfaced pinch rolls Air cylinder operated pinch rolls in lieu of bevel gear 72” diameter coil capacity 3” diameter hardened separator guide rolls in adjustable side plates Heavy-duty 41/2” diameter pinch rolls on 12" - 30” wide units Coil end bender Air-operated stock peeler Powered straighteners mounted in base
Coil Cradles - 30,000-60,000 Lb.				Coil Cradles - 30,000-60,000 Lb. 60” diameter coil capacity (optional 72”), widths to 96" 1” thick independently adjustable side plates Hardened and ground 6 ½” diameter pinch rolls Fused electrical disconnect enclosure 230, 460 or 575 volt electric, 3 phase (110 volt at controls) Heavy duty flame hardened cluster gears on pinch rolls Manually adjusted stock peelers (other peelers optional)
		Optional Features Widths available from 12” to 96” wide Powered pinch rolls standard. Powered straighteners optional. Powered straighteners sized to job specifications Air-operated tip-up chutes in models up to 36” wide Roll-down chutes in models 42” wide and wider Coil end bender Coil hold-down arm Air-operated stock peeler
Coil Cradles - Optional Features
(click on photo for larger image)	Optional hydraulic tilting pinch rolls assembly enhances operator safety by enabling the operator to direct heavy-gauge material to the feed system hands free.	(click on photo for larger image)	Optional precision machined roller track allows smooth flow of material though overhead deflector.
(click on photo for larger image)	Massive coil hold down arm - suitable for containing the thickest, hardest materials	(click on photo for larger image)	Hydraulic peeler/breaker assembly - used for hands-free threading of thick materials. Induces a reverse-bend allowing the lead edge of the material to be easily thread up.